Features

• Can reach up to 7 feet high and project out 8 feet into your pool, spa, or other water feature
• Nighttime color effects include the ability to hold on a steady color or scroll through a range of available colors. Chose energy efficient LED lighting for a nearly endless array of color choices.
• Designed for easy removal and replacement
• Easily adjusted two ways - vertically from 62 degrees to 75 degrees to create different heights adn arc shapes and direction pointed can be moved right or left up to 60 degrees total.
• The LED light engine comes with a 100' long 3-wire cable. Use a 120/12VAC-100watt pool lighting transformer powered with a GFCI breaker. Six Laminars can be powered with one transformer. Follow the National Electric Code and local codes to determine the placement of the transformer.

Design Points

• The Laminar arc can reach a maximum height of seven feet and a distance of eight feet.
  
• To achieve the maximum Laminar arc height, a water supply of 10gpm with 16 ft of head (measured at the Laminar) is required.
  
• Install the Laminar close to the edge of the pool to minimize water from splashing on the deck on windy days.
  
• Use a 20 micron cartridge filter to supply clean, filtered water to the Laminar. Do not use a DE or Sand filter.
  
• Use 1" Sch40 PVC pipe to supply the Laminar. On long pipe runs, calculate the pressure drop and compensate by increasing the supply pressure.
  
• Install a 1" ball or globe throttling valve on the water supply to EACH Laminar. When installing more than one Laminar, Pentair recommends installing a throttling valve on the main supply manifold.
  
• Install a 1-1/2" drain line to the bottom of the Laminar deck housing and create a drain system to prevent standing water.