| |

|
|
SAVI Note Underwater Lighting
|
| |
There are several systems available from Nexxus Lighting for underwater lighting for pools, spas and fountains.
When considering either a fiber optic or LED underwater light for a pool or spa it is advisable to use a lighter finished surface of the pool or spa for the best color renditions. Colored lighting will not be as noticeable on darker surfaces.
Remember, fiber optic lights have no code restrictions since there is no electricity in the light fixtures. So you can put lighting in shallow areas like beaches or tanning decks, fountains and steps. LED fixtures and replacement lights are ideal for either new or older existing pools where colored lighting is desired.
Multiple lights usually provide a better balanced lighting design for larger pools or pools with curves, niches or lots of angles. If more than one source or illuminator is used then special effects can be created where the spa is one color while the pool is another. The pool and spa lights can also be syncronized for another interesting effect. |
| |
SAVI Notes are a niche less underwater LED lighting system for pools and spas. The SaVi Notes fit into the standard wall fitting of a pool for easy design and installation SAVI Notes are part of a small but powerful lighting system designed to create even illumination and colorful lighting effects throughout your pool and spa. They fit into standard pool fittings as shallow as 4-IN below water level so they are ideal for swimouts, beach entries, sun shelves and other shallow water applications. Multiple SAVI Note locations will provide even illumination throughout the pool. |
| |
- No Niche Required! Fits standard gunite, fiberglass and vinyl return fittings.
- Perfect for beach entries, steps, swimouts, sunshelves and even “multiple lens” underwater illumination
|
| SAVI Note Underwater Lighting Featured Highlights: |
- Both Fixtures Fit Spa Niche
- Colorful Underwater Lighting, Powerful RGB LED Array
- No Niche Needed - Fits Standard Return Fitting
- Retrofit Fiber Optic Systems
- M4 Controller (Required)- Can Control Any Combination of Up to 4 SAVI Notes and/or X-Stream LED Modules
- M4 Controller Standard Version Color Modes:
- 5 static colors: White, Green, Dark Blue, Light Blue & Pink
- 4 color modes: Smooth color transition, blue/green fade, medium & fast color changes
|
| True-Color Mix Technology :: Colors mix in the lamp not in the pool so the light is always pure, bright and vibrant. Nine Exciting Color Modes. |
- Even Lighting Effects
- Easy Installation
- Design Flexibility
|
- Extended Lamp Life
- No Moving Parts
|
|
| Lamp Life :: Five times longer than standard pool lighting |
| Complete Coverage :: Evenly distribute light with multiple SAVI Note locations. |
| Compatibility :: Easily synchronize the SAVI NOTES with a SAVI POOL LIGHT or SAVI SPA LIGHT for a truly incredible lighting display . The M4 will accept the SAVI X-Stream LED Module for illuminating laminar water jets. |
| Easy Installation :: No niche is required for installation. The SAVI NOTE fits into a standard return fitting with a minimum 12 inches of 1.5-IN diameter PVC pipe. Then reduce to a 1-IN diameter conduit for the cable run to the M4 Controller. |
| Control these Lights with the M4 Control System :: The M4 accepts up to four SAVI Notes and can be wired to a wall switch or a pool control. Just toggle the switch to change to the next color mode. |
 |
| Additional Information |
|
| Special Note :: The SAVI Notes - (requires M4 Controller). SAVI Notes is a nicheless, underwater, multi-color LED lighting system for pools and spas. These small but powerful lights create a variety of effects and a myriad of colors. Can be used to retrofit fiber optic systems.The purchase of the M4 LED Controller is used to control the color changing ability of the lights. One M4 Controller can control up to four (4) SaVi Notes. ( See part number - M4-SA ) |
|


|
Nexxus M4 Control System
|
| The M4 Controller is used to control the color changing ability of the SAVI Source(s) or SAVI Note(s). One M4 can control up to 4 SAVI Source, SAVI Notes and/or 4 SAVI X-Stream Modules. The standard M4 can be connected to a standard wall switch or timer system. Toggle the power to the M4 controller to change color modes. The Stand-Alone M4 comes with 9 standard color modes (see below). The DMX version comes with 8 pre-programmed color modes (see below) and comes with software for custom programming. Using DMX, each light source can be addressed and programed. |
| Color Modes (Stand Alone Version): |
- Five Static Colors: White, Green, Dark Blue, Aqua & Pink
- Four Color Modes: Smooth color transition, blue/green fade, medium & fast color changes
|
| Color Modes (DMX Version): |
- Five Static Colors: White, Green, Dark Blue, Aqua, Red, Yellow & Purple
- Three Color modes: Slow color fade, Fast color snap & Fast fade (red, white,blue). Using DMX512 protocol any color can be selected, addressed and programmed
|
| M4 Controller Specification Features: |
- Enclosure Material/Finish: Aluminum, Power Paint White
- Input Voltage: 100-120 / 200-240 VAC, 47-63 Hz
- Power Consumption (Current): 1.5 A Max
- Output Voltage: 12VDC
- Output Current: 415mA per color, 4 RGB outputs
- Weight: 5.2 lb
- Operating Temperature: -20°C to 50°C
- Dimensions: 11.37" (W), 10.59" (D), 4.55" (H)
- Mounting: Surface or Wall mount
- Listings: ETL
- IP Rating: IP64
- Warranty: 2 years
|
| More Information: |
| |
|
 |
Nexxus SAVI Note Wall Fitting
|
| The SAVI Notes fit into the standard wall fitting of a pool for easy design and installation. |
|
|