SV150T6-S1 - Commercial Grade Pool Illuminator
The workhorse illuminator for fiber optics, with up to 756 with the upgrade kit (see SVFH756KIT) fiber capacity, the 150T6 illuminator boasts a powerful commercial quality 150 watt metal halide lamp with a glass reflector. It can handle most any fiber optic pool or landscape lighting application. The tower design allows for installation in the landscape, closer to the fixtures, which mean less fiber and less cost.

The Simple Sync system eliminates data cable and master-slave units. Synchronize up to 15 units without data cables, when the wires on the same circuit - 120 Volt systems only! Simply wire the units for power and go! No need to set up a master and slaves. All units automatically synchronize the color wheels when wired on the same circuit. Please note:: Individual wire runs must be made from each light source in order to stop and start the color wheel. Its that simple!


Featured Highlights:
++ Powerful 150 Watt Metal Halide Lamp
++ NEW 150T6-S1 Synchronizes Multiple Units Without Running Data Cables
++ Mounts in the Landscape, Within Close Proximity to Pool.
++++ Always check building codes for distance requirements

UL Listing:
Wet Locations, UL file No. E202257

Electrical Rating:
120 VAC, 60 Hz / 3 Amps (start up)
120 VAC, 60 Hz / 1.8 Amps (running)

Lamp:
150 watt metal halide - 4,000K
10,000 hours average life

Fiber Capacity:
550 fibers maximum w/.75mm fibers
756 fibers maximum (upgrade kit) .75mm

Power Consumption:
200 watts max

Weight: 21 lbs. / 9.5 kg.

Ambient Operating Temperature:
-20 DEG F to 110 DEG F
-29 DEG C to 44 DEG C

Material/Finish:
UV stabilized materials Water, corrosion and chemical resistant

Mounting / Installation:
Surface or burial mount up to area below fan location.

Standard Features:
On/off power and color wheel switch

Ventilation:
Forced ventilation 115 CFM

Warranty: 2 Year (excluding lamp)
Standards: UL / cUL
IP Rating: 23