Product Features

• 10 dramatic lighting effects to transform your spa into a nighttime oasis
• Designed to be a direct replacement for most 12V AC wedge based light bulbs
• Installation is as easy as changing a standard light bulb
• 24 Ultra-bright LEDs with a rated lifetime of 100,000 hours
• 5-year full manufacturer's warranty
  
   

How many lighting modes does the Supervision AGS24 have?
Each AGS24 light comes with 10 dramatic lighting effects to choose from:
 

• White Only
• Color Change - Colors transition from color to color, cycling through the color spectrum. Each color cycle takes approximately one minute.
• Yellow
• Blue
• Orange
• Green
• Hot Pink
• Cyan
• Blue/Green Mix
• Party Mode - Multiple Colors transition quickly, cycling through the color spectrum.

How do you change lighting modes?
To advance to the next lighting mode, switch the unit off, then on again within 5 seconds. Each time you do so, the light will advance to the next color mode. To resume a lighting mode, leave the unit switched off to store the last lighting mode displayed into memory. That same lighting mode will be displayed the next time the light is switched on.

Installation is Easy

Frequently Asked Questions

What is an AGS24 Spa LED Light?
The AGS24 is a digital color-changing LED light array designed specifically for portable spa applications. With their longer lifetimes and higher efficiencies, light-emitting diodes (LEDs)have transformed the illumination industry forever. An LED is a semiconductor device that emits monochromatic light of varying colors using 90% less power than standard incandescent bulbs. LEDs have an extremely long life span, twice longer than the best fluorescent bulbs and twenty times longer than the best incandescent bulbs. The AGS24 uses an array of 24 microprocessor-controlled LEDs to transform your spa into a nighttime oasis.

How long will the LEDs in a Super Vision AGS24 light last?
The LEDs used in the AGS 24 have a rated lifetime of 100,000. That works out to be approx. 11 years of continuous use under normal operating conditions.

Does the AGS24 require special wiring or switches to function?
No. The AGS24 is designed to be a direct replacement for the 12V wedge-based light bulb sockets. To see an example of the type of bulb used in most spas, please look up a GE912 type bulb on the web. The only switch you need to control the AGS24 is the your existing light switch. Each time you flip the switch off, then on again, the microprocessors in the light will advance to the next lighting effect. If you leave the light off for more than five seconds, the last lighting effect is stored into memory for the next time you use your spa.

Please note: This item should not be used in spas with dimmers. 12 Volt Systems Only