S.R. Smith Pool Ladders & Rails - Rails, Stair Rails, Hand Rails, Parts & Accessories

S.R. Smith Swimming Pool Rails

S.R. Smith 2-Bend Stair Rails

2-Bend Stair Rails come in a wide variety of lengths to accommodate almost any pool. Constructed of stainless steel, these rails can also be powder coated for additional protection.

Tubing: 1.50" or 1.90" OD
Wall thickness: .049", .065"
Type: 304 or 316L

S.R. Smith 3-Bend Stair Rails

3-Bend Stair Rails come in a wide variety of lengths to accommodate almost any pool. Constructed of stainless steel, these rails can also be powder coated for additional protection.

Tubing: 1.50" or 1.90" OD
Wall thickness: .049", .065"
Type: 304 or 316L

S.R. Smith California (Pacific) Pretzel Bend Handrails

The unique shape of the California Pretzel Bend handrails allow you to install anchors laterally, taking up a minimal amount of deck space. The stainless steel's mirror finish will keep your facility looking great with little maintenance.

Tubing: 1.90" OD
Wall thickness: .109" or .145"
Type: 304

S.R. Smith Commercial Ring Handrails

Commercial Ring handrails provide a suitable hand grip for in-wall pool ladders. The long lasting, stainless steel, high-sheen mirror finish will keep your pool looking great for years with little maintenance.

Tubing: 1 5/8" OD
Wall thickness: .065"
Type: 304

S.R. Smith DMS-100

The DMS-100 is a 3-bend rail suitable for use on pool stairs and sloped entries. Constructed of polished stainless steel.

Tubing: 1.90" OD
Wall thickness: DMS-100A .045", DMS-100B .065"
Type: 304 or 316L

S.R. Smith DMS-101

The DMS-101 is a 4-bend rail suitable for use on pool stairs and sloped entries. Constructed of polished stainless steel.

Tubing: 1.90" OD
Wall thickness: DMS-101A .045", DMS-101B .065"
Type: 304 or 316L

S.R. Smith DMS-102

The DMS-102 is a braced rail suitable for use on pool stairs and sloped entries. Constructed of polished stainless steel.

Tubing: 1.90" OD
Wall thickness: DMS-102A .045", DMS-102B .065"
Type: 304 or 316L

S.R. Smith DMS-103

The DMS-103 is a braced rail suitable for use on pool stairs and sloped entries. Constructed of polished stainless steel.

Tubing: 1.90" OD
Wall thickness: DMS-103A .045", DMS-103B .065"
Type: 304 or 316L

S.R. Smith Exercise, Training and Therapeutic Bars

Exercise, Training and Therapeutic (ETT) bars are available in two standard sizes, 48" and 88", as well as custom sizes to meet the requirements of your facility. ETT bars are also available with or without flanges.

Tubing: 1.50" or 1.90" OD
Wall thickness: .065"
Type: 304 or 316L

Bars with Flanges	Bars without Flanges

S.R. Smith Figure 4 Handrails

Figure 4 handrails are constructed from high-quality stainless steel, or can be powder coated for an added layer of protection.

Tubing: 1.50" or 1.90" OD
Wall thickness: .065", .109", or .145"
Type: 304 or 316L

S.R. Smith P-Rails

P-Rails provide an ideal hand grip for in-wall pool ladders. The long lasting, stainless steel, high-sheen mirror finish will keep your pool looking great for years, with little maintenance.

Tubing: 1 5/8" OD
Wall thickness: .049"
Type: 304

S.R. Smith Pretzel Bend Handrails

The unique shape of the Pretzel Bend handrails allow you to install anchors laterally, taking up a minimal amount of deck space. The stainless steel's mirror finish will keep your facility looking great with little maintenance.

Tubing: 1.90" OD
Wall thickness: .109" or .145"
Type: 304

S.R. Smith Residential Ring Handrails

Residential Ring handrails provide a suitable hand grip for in-wall pool ladders. The long lasting, stainless steel, high-sheen mirror finish will keep your pool looking great for years with little maintenance.

Tubing: 1 5/8" OD
Wall thickness: .049"
Type: 304

S.R. Smith Spa Rails

The Spa Rail is a stainless steel, ring handrail intended to increase safety by aiding spa users getting into and out of the spa. Four mounting bolts are required to secure this rail to the deck, and should be selected according to your site requirements.

Tubing: 1 5/8" OD
Wall thickness: .049"
Type: 304

S.R. Smith Stanchions

Stanchions are available in a variety of lengths with several eyebolt configuration options for use in competition, or as line and crowd control. Our optional, adjustable stainless steel collar band can be used to allow for adjustable line heights.

Tubing: 1.625" or 1.90" OD
Wall thickness: .065", .109", .145"
Type: 304
Available with one eyebolt on top, or two or four eyebolts on the length of the stanchion

S.R. Smith Commercial Rails

S.R. Smith Rails are available in all shapes and sizes, we have a standard hand or stair rail for virtually every application, or we can customize the dimensions to make it work for you.