• Jandy DEL Series DE Filters
  
• Jandy DEL Series DE Valve

• Jandy CL Series

• Hayward Pro Series Plus Side Mount
• Hayward Pro Series Side Mount
• Hayward Pro Series Side Mount Valve
• Hayward Pro Series Top Mount
  

• Hayward Star Clear
• Hayward Star Clear Plus
• Hayward Swim Clear

Hayward DE Filters

• Hayward Pro Grid
• Hayward Pro Grid Valve

Hayward Above Ground Filter System

• Hayward XStream System

• Sta Rite System 3 Sand
• Sta Rite System 3 Sand Valve

Sta Rite Cartridge Filters

• Sta Rite Posi Flo II
• Sta Rite System 2 PLM
• Sta Rite System 3 Cartridge
• Sta Rite System 3 Cartridge
• Sta Rite System 3 Cartridge Replacement Filter Cartridge

Sta Rite DE Filters

• Sta Rite System 3 DE
• Sta Rite System 3 DE Valve
• Sta Rite System 3 Module DE
• Sta Rite System 3 Module DE Valve

Pentair Sand Filters

• Pentair Sand Dollar
• Pentair Tagelus Fiberglass
• Pentair Triton Fiberglass
• Pentair Triton Fiberglass Valve

Pentair Cartridge Filters

• Pentair Clean and Clear
• Pentair Clean and Clear Plus

Pentair DE Filters

• Pentair 4000 Series
• Pentair FNS Plus
• Pentair FNS Plus Valve

Pentair Quad DE Filters

• Pentair Quad DE Filter

There are three popular methods of filtration - Sand, Cartridge, and Diatomaceous Earth (D.E).

Sand Filters
In this method, impurities are extracted from the water utilizing sand to collect and attract the debris. Sand filters must be backwashed (running it in reverse) to unload the water waste. This is a manual process that must be performed every few weeks. Sand filters trap debris as small as 20 to 40 microns.

Cartridge Filters
Cartridge filters have a greater surface area than sand allowing for fewer clogs and easier maintenance. Cartridge filters are designed to run at lower pressure than sand which puts less backpressure on the pump, providing more flow and turnover. Cartridge filters should be cleaned once or twice a season by simply hosing them off. Cartridge element filters trap debris as small as 10 to 15 microns.