About The Product

Dependably on the job - Completely out of sight

Sensor Espio™ is a very discreet pool alarm.
It is the only fall sensing alarm system designed to install underneath pool coping where it is out of sight and out of the way.

Sensor Espio™ can perfectly be integrated to most existing or under construction swimming pools, thanks to its multi support system. Moreover its innovative design allows it to be compatible with a large majority of automatic pool covers.

Equipped with a powerful integrated siren and a remote alarm to place in the dwelling, Sensor Espio™ is simple to install and easy to use thanks to its remote control.

Perhaps most important for you to know is that Sensor Espio™ is based on technology proven in more than 300,000 pools worldwide. Aquasensor technology is clearly the global standard. This is a product you can trust.

Good Housekeeping Magazine Says Swim Alert® Pool Alarm Made by MG International Is Best in Tests

MG International's Sensor Espio® pool alarm, which employs the same detection technology as the Swim Alert but offers additional features at a higher retail price, also passed rigorous safety tests by the institute conducted earlier this year at Olympic Pools in Flanders, N.J. to determine which alarms effectively detected when a child fell into the water. Three of the seven pool alarms tested failed to meet the safety requirements of the New York City-based institute, a product evaluation laboratory established in 1900 by the magazine that employs a staff of engineers and researchers to test a wide range of consumer products.

• The link to the article is: http://www.goodhousekeeping.com/home/products/best-pool-alarm-gate

Advantages

• Sensor Espio™ comes with a convenient wireless, handheld remote on/off control. For safety sake, it is designed with a limited range of 10' to require pool inspection before disarming. This is a critical design feature for maximum safety.

• Sensor Espio™ allows installation on pools with automatic pool covers.

• For pool owner convenience, the wireless indoor alarm has an extensive 100' range.

• Although totally waterproof, Sensor Espio™ must be half immerged, according to the manufacturer's recommendations, in order to work properly.

• For convenience and safety, Sensor Espio™ automatically rearms itself a few minutes after swimmers leave the pool.

• Installation is simple and fast on new or existing pools. All hardware and simple instructions are provided, including required batteries.

• As another indicator of Sensor Espio™ quality and reliability, it is backed by a 2-year limited warranty. As you can see, Sensor Espio™ anticipates and meets all the challenges for a pool alarm that’s effective, dependable, simple to install and operate, and yet invisible on the job. As you take steps to prevent the heartbreak of pool-related accidents, rely on Sensor Espio™ as your proven and positive line of defense.

SPECIAL NOTE : Exclusive Aquasensor Technology minimizes false alarms. Upon installation and initial start-up of Sensor Espio™ , all pool operating systems should be operating (filter pump, waterfall, fountain, cleaner, etc.). Sensor Espio™ self-calibrates to its environment during the first 10 minutes of operation so it "knows" not to activate its alarm as the result of these normal water disturbances.

Aquasensor smart technology quickly senses pool fall by people that are 18 pounds or heavier to meet ASTM F2208-02. A powerful poolside alarm (100 db) and wireless remote alarm (85db) are both activated within seconds when fall is detected. Sensor Espio™ is effective in pools as large as 20' x 50'.

While Sensor Espio™ dependably senses fall, it is not falsely triggered by other routine water disturbances. Exclusive detection technology knows the difference between body fall and wind, rain, and water disturbances created by pool equipment. The result is a minimum of false alarms.

How does it work?
The fall detector, when activated, monitors the pool activity permanently. When a body falls in the pool, Sensor Espio™ analyses the generated underwater wave and triggers its powerful sirens to warn of the danger and therefore optimizes adult's reaction.
When you want to swim, you inform Sensor Espio™ using the provided remote control and Sensor Espio™ will therefore suspend its monitoring while you are swimming. After swimming, once you have left the pool and the pool water has become still again, Sensor Espio™ will automatically restart its monitoring and inform you.

During the time between the end of swimming and the automatic rearming of Sensor Espio™, it is compulsory to remain vigilant

Choice of location

Do not install your device on the pool edge before having determined the location that will ensure optimal monitoring of your swimming pool. After having determined the appropriate location, you must ensure that the siren can be heard from your home. Sensor Espio™ must be positioned in the center of the long side (position recommended for rectangular swimming pools) and against a flat wall in your pool. If your pool does not correspond to the configurations shown below, ask your retailer for advice. Check that there is easy and practical access to the activation zone (where you place the magnet).

Ensure that the central unit is more than 3 feet away from the filtration system (return fittings, waste plug, skimmer, vacuum fittings, etc.) or waterfall or any other device that may disturb the pool at this place. Your fall detector can be used on pools with maximum dimensions of 20 x 50 feet, and must not be more than 33 feet away from all possible fall locations. In the case of a larger swimming pool, or one that is of a particular shape, ask your retailer for advice

• Download Owners Manual
  
  
• See Sensor Espio Pool Alarm in Action