Installation & Maintenance
There are many ways to install ozone on a spa. Please log onto our website www.delozone.com to download an Eclipse spa ozone manual from our library (also includes ZO-301/302 and CDS-16 spa ozone generation units). These days, spa manufacturers have “ozone ready” spas. This means that there is a dedicated port for the ozone to enter, thus bringing ozone through an air line and through the jets (either the main jets or a dedicated ozone outlet).
Some manufacturers use an injector which is the most effective way to dissolve the ozone into the water. The injector creates very small bubbles and mixes them violently with the water stream. This action increases the air/water interface area allowing ozone to dissolve very thoroughly. Once dissolved, ozone goes to work oxidizing organics and contaminants in the water stream. Another effective way to introduce ozone on a spa is with a longer return line (the line(s) leading from the filtration equipment back to the tub). This will allow ozone to have more time to oxidize organic matter before it is introduced to the main tub. Again, there are many installations for ozone on a spa. Please refer to our installation manuals.
The ozone, in many applications, will only run during normal operation of the filtration equipment. The longer your filtration equipment runs, the cleaner the spa will be. We do not recommend running the equipment
less than 6 hours. Again, the longer, the better.
Pool Products