In the third part in our eight part series we continue showing you the process of removing your old equipment and retrofitting it with brand new energy efficient Jandy pool products. With the new equipment we will have a totally automated pool that will require very little maintenance as well as cost less to operate.

In our last video we plumbed all of our pumps and attached them to our concrete pad. In this video we move forward to installing the Jandy 580 sq ft CV Series filter and the Jandy LXi 400,000 BTU Natural Gas heater. So sit back, relax, and watch as we continue retrofitting this pool.

Fiberstars Inc. has been providing solutions to backyard swimming pool lighting, water features, wireless controls, and many other complementary products for both your pool and spa. One of those products is the Fiberstars RM-6000 Automatic Operating System. This installation guide will outline the steps needed to install the RM-6000 Automatic Operating System.

This RM-6000 Automatic Operating System package is specifically designed for the 6004 AND 6004-AS fiber optic illuminators and should not be modified or adapted in any way. This is an electric component and should only be installed by a qualified technician. Please follow the instructions carefully.

In the second part in our eight part series we continue showing you the process of removing your old equipment and retrofitting it with brand new energy efficient Jandy pool products. With the new equipment we will have a totaly automated pool that will require very little maintenance and it will also cost less to operate.

In our last video we started out by removing the old equipment and leaving some of the plumbing. In this video we will continue with our retrofit by installing our three Jandy pumps. So sit back, relax, and watch as we retrofit this pool.

This is our first part in our eight part series of videos where we show you the process of removing your old equipment and retrofitting it with brand new energy efficient Jandy pool products. With the new equipment we will have a totally automated pool that will require very little maintenance as well as cost less to operate.

The first thing we'll need to do is remove all the old equipment. So sit back, relax, and watch as we retrofit this pool.

We have successfully installed all of our pool equipment. We can now test the equipment, as well as fill the pool back up with water. After the pool is filled we'll also need to test and balance the water as well as program our control panel.

As you can see with a little bit of work any green, algae filled pool can be restored. So join us as we conclude our Algae Filled Green Swimming Pool Rebuild series of videos.