Jandys Pool Link provides cost effective timing functions in an easy to wire module that can be added to any AquaLink RS Power Center providing basic automation. Dual timers provide you with the operational features youll need for a single speed filter pump plus a cleaner booster pump, in-floor cleaning system or two-speed pump operation. Dual circuit control will provide the functionality needed to keep the water flowing and your pool sparkling clean. Simple to install and operate, the Pool Link is perfect for basic automation and easily upgraded later to any AquaLink RS advanced control system.
The Pool Links primary time clock is activated by standard pull-to-trip tabs, providing your daily automation of filtration cycles. If you are looking to keep your energy bills down, set your filtration cycle to activate during non-peak hours. Each pulled tab represents 30 minutes of pump activation, so you can set your filtration cycles for when you want and however long you need. Rest assured that, each and every day, the Pool Link will keep your pool sparkling clean. With the addition of a JVA, this system will also automate an in-floor cleaning system by rotating the JVA every 20 minutes.
In addition to controlling a single speed filter pump, the Pool Link will activate a cleaner booster pump through DIP switch settings. Just like clockwork, the Pool Link dutifully performs its task of keeping your pool clean every day.
If your pool uses a two-speed pump for energy efficiency, you can activate it from the Pool Link. Simple settings of a DIP switch will operate your pump in low speed for energy savings then switch to high speed when necessary.
Since life is rarely timed perfectly, overriding the Pool Link is easy. With a simple flick of a switch, you can override your setting and provide custom filtration to clean up after a windy storm or in advance of a pool party with friends and family. You can also switch off your pump for scheduled maintenance or when you need instant peace and quiet.
Freeze protection and heater connection are standard with the Pool Link control system, as well as control of an in-floor cleaning system with the addition of a JVA. Automation of Jandys PureLink water purification system is also a benefit when partnered with the Pool Link Module.
The Primary time switch sets the time and duration of filtration. The Secondary time switch sets duration of cleaner booster pump or HIGH SPEED operation of two speed pumps.
NOTE: REQUIRES THE PURCHASE OF A Power Center

Jandy Module Includes: Pool Link bracket and PCB, Primary 24 hour Time Clock, Secondary Timer Switches, Service switches for both timers, Freeze Protection Sensor. Requires: 1 Power Center, can be with or without Water Purification.