Intermatic?s wireless pool and spa controls utilize ground-breaking Z-wave technology. While some controls communicate transmission problems, Intermatic?s wireless devices allow total and uninterrupted communication between the controller and the equipment.

Intermatic?s modular approach provides for added diversity and convenience. Modules are capable of working independently or within a system. Portions can be added or replaced without interfering with the original system, and each system can be designed to incorporate as many or as few features as needed to accomplish the task at hand - making Intermatic the most value added and cost-effective choice.

All I-Wave Models include wireless transmitter and transceiver, two PE24VA valve actuators, five total circuits (three timed and two on demand), two-speed control, water temperature display, heater temperature control, fireman switch, freeze protection and 125 Amp breaker base.

For Pool, Spa or Water Feature Applications, the PE Series Digital Controls includes one P1353ME (includes Memory backup, Freeze protection, Heater protection "fireman switch", LCD Read-out, Three ON/OFF events per day per circuit) mechanism that controls a total of three timed circuits, including single speed or two-speed filter pumps, cleaner/booster pumps, pool lights, spa lights and landscape lights. Countdown and override features allow programs to be interrupted for service and automatically resumed without reprogramming your system. The P4243ME Valve/Pump Switch - controls up to three valve actuators, controls two circuits, switched heater thermostat, and has remote control capabilities.

This Intertmatic I-Wave Wireless Pool/Spa Control PE45343RCT1 system includes:

QTY 1 - Valve/Pump Switch (P4243ME)
QTY 1 - Programmable Control Mechanism (P1353ME)
QTY 2 - Valve actuators - (PE24VA)
QTY 1 - Wireless Panel Mounted Transceiver - (PE650)
QTY 1 - Hand-Held Transceiver (PE950)
QTY 1 - 100 Watt Transformer

Standard Applications:
- Pool Spa/ combinations
- Fountains
- Water Features
- Pool/Spa Lighting
- Pool/Water Feature Combinations
- Landscaping Lighting

Standard Product Features:

- Case: 26.0 INCH (66.3cm) high x 18.0 INCH (45.9cm) wide x 5.5 INCH (14.0cm) deep, 0.048 INCH steel with electrostatically applied light beige finish.
- Knockouts: Two Combination 3/4-1-1-1/4 INCH and eleven combination 1/2-3/4 INCH knockouts on the bottom. Two 3/4-1 INCH combination and four combination 1/2-3/4 INCH knockouts on the back. Low voltage compartment has two combination 1/2-3/4 INCH knockouts and one 3/4 INCH hole with a shutter bushing installed. Two combination 3/4-1 INHC and one combination 1/2-3/4" knockouts. One 1-3/4 INCH x 2-3/4 INCH knockout on the right side.
- Panel Rating: 125 AMP 120/240 VAC or 120/208 VAC Single Phase.
- Agency Approval: CSA/C-US