Intermatic RC2163BFE Pool and Spa Controller N/Switch
Order today, to your door by February 4
No Sales Tax!
About the Intermatic RC2163BFE
Intermatic Pool and Spa Controller N/Switch - RC2163BFE
Automatic Control Features:
- Case: 16-1/2 (41.9 cm) H x 10-7/8 (27.6 cm) W x 4-1/4 (10.8 cm) D, 0.048 steel with electrostatically applied beige finish.
- Knockouts: Two 1/2, three combination 1/2-3/4, and two combination 3/4-1 knockouts on the bottom. Four 1/2, three combination 1/2" - 3/4" on the back. One combination 3/4-1 on the left side. One 1-3/4 x 2-3/4 knockout on the right side for mounting switches and GFCI.
- Panel Rating: 100 Amp 120-240 VAC. or 120-208 VAC single phase - 60 HZ.
- Electrical Rating: See table below. Actuator Circuit: 24V. - 40 Amp Max.
- Heater Control: Yes
This line of Air or Remote Operated Controls is specially designed to control pool/spa combinations economically and reliably away from the equipment. With one touch, these units automatically override the 24 HR. timer and turn ON the filter pump, switch the valves from pool-filter mode to the spa/water feature mode and switch the compatible dual thermostat on the heater/heat pump from the pre-set pool temperature to the pre-set spa temperature. Comes complete with two PE24VA 24-Volt valve actuators.
Intermatic RC2163BFE Specifications
|Voltage||120V / 240V|
|Product Type||Automatic Control|
|Control System Type||Control System|
Frequently Bought Together