Fiberstars 25' StarGlo Kit- logo
Fiberstars 25' StarGlo Kit- logo Fiberstars 25' StarGlo Kit- logo Fiberstars StarGlo Landscape Fixture
This product has been discontinued

Fiberstars SGKIT-25 StarGlo Kit 25' of 25 Strand Fiber - Includes 1 SG-100 with Fiber Pre-Attached

SKU #: SGKIT-25


Product Rating:

  Product Details Resources All Media Reviews  

Short Description

Fiberstars StarGlo fixtures are flexible and are great for lighting up rock waterfalls and landscape features.

Description

CASCADING WATER LIGHTING METHOD

HOW TO DO IT
This method should be done during the construction of the waterfall, but can be done afterwards by hiding the pipe or conduit with rocks and concrete. Using StarGlo fixtures (or kits) you can light areas of cascading water in the waterfall. The StarGlo fixtures should be placed above water level and pointed towards areas where the most water action will occur. This will typically be at the bottom of a waterfall with the StarGlo pointed back towards the cascading water. DO NOT place the StarGlo submerged under water! It is NOT a watertight fitting!

Use 1' PVC pipe or conduit from the illuminator to each StarGlo location, then reduce to -1/2" FIP to allow the fixture to thread in. Always use sweep 900 fittings to allow the fiber to be installed easily. 25, 50, or 75 strands of fiber may be used.

WHAT IT DOES
This method will light the splashing water with a small flood of light.